D30 Knuckel

[timmy_69]

If anyone might have a driverside knucel for a D30.

[Jeeperz-Creeperz]

<div class='quotetop'>QUOTE(timmy &#064; Aug 31 2006, 07&#58;15 AM) 17080</div>

If anyone might have a driverside knucel for a D30.
[/b]
I assume this is for a YJ?

I&#39;ve got one I&#39;ll be pulling off an XJ axle shortly.

[timmy_69]

Yes it is a YJ. That would be great. What would you want for it?

[Jeeperz-Creeperz]

<div class='quotetop'>QUOTE(timmy &#064; Aug 31 2006, 09&#58;44 AM) 17084</div>

Yes it is a YJ. That would be great. What would you want for it?
[/b]
I&#39;ll take &#036;20? (OBO)

Where are you located?

[timmy_69]

I live in Fenton but I work in Troy.

[MuddyPaws]

Get the right year. It does matter. There is a year split...and I don&#39;t know what the split is. I have a almost complete d30 that I was gonna drop in my YJ and just swap over my parts like wheel bearings and brakes and stuff but the wheel bearings are different....so are the brake rotors.

[Jeeperz-Creeperz]

<div class='quotetop'>QUOTE(MuddyPaws &#064; Aug 31 2006, 07&#58;45 PM) 17122</div>

Get the right year. It does matter. There is a year split...and I don&#39;t know what the split is. I have a almost complete d30 that I was gonna drop in my YJ and just swap over my parts like wheel bearings and brakes and stuff but the wheel bearings are different....so are the brake rotors.
[/b]

Judging by his avatar I&#39;m guessing it&#39;s a 1992-1995. The wheel bearing split is at 1989-down and 1990-up. My axle is the later model.

I&#39;m don&#39;t believe that the knuckles are different between the axles. There are actually 3 different wheel bearing/rotor combinations but I would think they would still work with the knuckle (I know they bolt on). The rotors have different hat depths and the wheel bearings used must correspond to those depths.


<div class='quotetop'>QUOTE(timmy &#064; Aug 31 2006, 10&#58;44 AM) 17089</div>

I live in Fenton but I work in Troy.
[/b]
I can pull it off on Saturday, if you want to come and get it.

[MuddyPaws]

I tried to put a newer bearing into my 87 knuckle and although the holes lined up, it would not fit into the large round hole. :confused:

[Jeeperz-Creeperz]

<div class='quotetop'>QUOTE(MuddyPaws &#064; Sep 2 2006, 10&#58;58 PM) 17159</div>

I tried to put a newer bearing into my 87 knuckle and although the holes lined up, it would not fit into the large round hole. :confused:
[/b]

I thought we covered this and that my axle was a later model.... :WhiteRhino:

Don&#39;t you start school soon? :bootyshake:

[timmy_69]

It is actually a 96 D30.

[MuddyPaws]

<div class='quotetop'>QUOTE(Jeeperz&#045;Creeperz &#064; Sep 5 2006, 09&#58;16 AM) 17201</div>

<div class='quotetop'>QUOTE(MuddyPaws &#064; Sep 2 2006, 10&#58;58 PM) 17159

I tried to put a newer bearing into my 87 knuckle and although the holes lined up, it would not fit into the large round hole. :confused:
[/b]

I thought we covered this and that my axle was a later model.... :WhiteRhino:

Don&#39;t you start school soon? :bootyshake:
[/b][/quote]


Yes I start school...actually I have now...but I was mentioning because you said that the knuckles wen&#39;t different....but if they aren&#39;t different, the the wheel bearing would fit in both the older and the newer, but they won&#39;t.

And I missed the thingy about yours being the newer one.

[Jeeperz-Creeperz]

I pulled that knuckle off yesterday, if you&#39;re still interested....

[timmy_69]

<div class='quotetop'>QUOTE(Jeeperz&#045;Creeperz &#064; Sep 13 2006, 10&#58;46 AM) 17541</div>

I pulled that knuckle off yesterday, if you&#39;re still interested....
[/b]
do you still have the knuckle?