PDA

View Full Version : Who was asking about TJ tops interchanging?



shawn
June 18th, 2006, 08:01 PM
I couldn't find the thread within the first 30 seconds so I gave up. I just put a 06 TJ factory top on a 97 TJ, we replaced all the hardware (bows and doorjams and soft uppers) and it works just great, so I don't know what the differences is between the 97-02 and later. but, if you get all the hardware, it will work just great!

Bult4mud
June 19th, 2006, 10:36 AM
it was me

but im going the other way 00-03 for ROB

Deathdealer
June 19th, 2006, 11:28 AM
<div class='quotetop'>QUOTE(Bult4mud &#064; Jun 19 2006, 10&#58;36 AM) 15026</div>

it was me

but im going the other way 00-03 for ROB
[/b]

Probably only needs a little fabwork to go the other way, I think the header latches are too wide to fit inbetween the plastic trim they put on the newer wranglers.

shawn
June 19th, 2006, 11:57 AM
<div class='quotetop'>QUOTE(Deathdealer &#064; Jun 19 2006, 11&#58;28 AM) 15028</div>

<div class='quotetop'>QUOTE(Bult4mud &#064; Jun 19 2006, 10&#58;36 AM) 15026

it was me

but im going the other way 00-03 for ROB
[/b]

Probably only needs a little fabwork to go the other way, I think the header latches are too wide to fit inbetween the plastic trim they put on the newer wranglers.
[/b][/quote]

Like I said, it worked perfect, so I don&#39;t know what the difference is. The header clamps on just like the old header, we used all 06 hardware on a 97.