PDA

View Full Version : Mounds June 4 with Tri-City Trailriders



Creative Fab
May 22nd, 2006, 09:08 AM
The TCT club will be riding at the Mounds on June 4th. We will be running the tight and twisty stuff if your interested.

Body damage is a possibility, or at least fender flare damage.

We will be meeting in the parking lot at noon.

WhiteRhino
May 22nd, 2006, 10:05 AM
Good chance I will join you!

95geo
May 22nd, 2006, 10:08 AM
<div class='quotetop'>QUOTE(WhiteRhino &#064; May 22 2006, 10&#58;05 AM) 14323</div>

Good chance I will join you&#33;
[/b]

if i get through paragon i may join you as well, and im bringing loppers this time

ganz
May 22nd, 2006, 12:06 PM
Its a maybe
Ganz

kb8ymf
May 22nd, 2006, 01:07 PM
<div class='quotetop'>QUOTE(Ironman &#064; May 22 2006, 09&#58;08 AM) 14317</div>

The TCT club will be riding at the Mounds on June 4th. We will be running the tight and twisty stuff if your interested.

Body damage is a possibility, or at least fender flare damage.

We will be meeting in the parking lot at noon.
[/b]

I&#39;m on glide path to NEVER wheel again unless some vendors start shipping some PARTS&#33;
J-KB8YMF

Creative Fab
May 22nd, 2006, 01:28 PM
I had my lopper with me but I never broke them out, I will June 4th however&#33;


And JM, what parts are you waiting on?

Roadhouse
May 22nd, 2006, 01:30 PM
<div class='quotetop'>QUOTE(kb8ymf &#064; May 22 2006, 01&#58;07 PM) 14334</div>

<div class='quotetop'>QUOTE(Ironman &#064; May 22 2006, 09&#58;08 AM) 14317

The TCT club will be riding at the Mounds on June 4th. We will be running the tight and twisty stuff if your interested.

Body damage is a possibility, or at least fender flare damage.

We will be meeting in the parking lot at noon.
[/b]

I&#39;m on glide path to NEVER wheel again unless some vendors start shipping some PARTS&#33;
J-KB8YMF
[/b][/quote]


So I might actually wheel before JM? :rolf:

95geo
May 22nd, 2006, 01:35 PM
<div class='quotetop'>QUOTE(Roadhouse &#064; May 22 2006, 01&#58;30 PM) 14338</div>

<div class='quotetop'>QUOTE(kb8ymf &#064; May 22 2006, 01&#58;07 PM) 14334


I&#39;m on glide path to NEVER wheel again unless some vendors start shipping some PARTS&#33;
J-KB8YMF
[/b]


So I might actually wheel before JM? :rolf:
[/b][/quote]

:rolf: now thats funny....

he has a 2-3 week wait for shocks that poly performance screwed up during shipping and an unknown wait on the kicker 2 box (intermediate transfercase) then about 2 weeks after the case gets here before the driveshafts will be back

Jarhead
May 22nd, 2006, 02:11 PM
<div class='quotetop'>QUOTE(Roadhouse &#064; May 22 2006, 01&#58;30 PM) 14338</div>

<div class='quotetop'>QUOTE(kb8ymf &#064; May 22 2006, 01&#58;07 PM) 14334

<div class='quotetop'>QUOTE(Ironman &#064; May 22 2006, 09&#58;08 AM) 14317

The TCT club will be riding at the Mounds on June 4th. We will be running the tight and twisty stuff if your interested.

Body damage is a possibility, or at least fender flare damage.

We will be meeting in the parking lot at noon.
[/b]

I&#39;m on glide path to NEVER wheel again unless some vendors start shipping some PARTS&#33;
J-KB8YMF
[/b][/quote]


So I might actually wheel before JM? :rolf:
[/b][/quote]
Hey Roadhouse, take it nice and slow teaching KB8YMF how to be a Master Web Wheeler. Anyone think KB8YMF kept pushing the idea of the Hamm Radio so he could wheel with us from home? :rolf: :rolf:

WhiteRhino
May 22nd, 2006, 03:18 PM
<div class='quotetop'>QUOTE(Jarhead &#064; May 22 2006, 02&#58;11 PM) 14343</div>

<div class='quotetop'>QUOTE(Roadhouse &#064; May 22 2006, 01&#58;30 PM) 14338

<div class='quotetop'>QUOTE(kb8ymf &#064; May 22 2006, 01&#58;07 PM) 14334

<div class='quotetop'>QUOTE(Ironman &#064; May 22 2006, 09&#58;08 AM) 14317

The TCT club will be riding at the Mounds on June 4th. We will be running the tight and twisty stuff if your interested.

Body damage is a possibility, or at least fender flare damage.

We will be meeting in the parking lot at noon.
[/b]

I&#39;m on glide path to NEVER wheel again unless some vendors start shipping some PARTS&#33;
J-KB8YMF
[/b][/quote]


So I might actually wheel before JM? :rolf:
[/b][/quote]
Hey Roadhouse, take it nice and slow teaching KB8YMF how to be a Master Web Wheeler. Anyone think KB8YMF kept pushing the idea of the Hamm Radio so he could wheel with us from home? :rolf: :rolf:
[/b][/quote]

:haha: :rolf: :haha: :rolf: :haha: :rolf: :haha: :rolf: :haha: :rolf:

Jarhead
May 22nd, 2006, 08:20 PM
Hey Pat (Ironman), I am sorry, but it appears we have high jacked your post for the trail ride with Tri-City Trailriders on June 4th - we now return to your regularly scheduled program, er I mean post... :bigemo_harabe_net-145: .

Timberwolf
May 22nd, 2006, 09:47 PM
<div class='quotetop'>QUOTE(Jarhead &#064; May 22 2006, 02&#58;11 PM) 14343</div>

<div class='quotetop'>QUOTE(Roadhouse &#064; May 22 2006, 01&#58;30 PM) 14338

<div class='quotetop'>QUOTE(kb8ymf &#064; May 22 2006, 01&#58;07 PM) 14334

<div class='quotetop'>QUOTE(Ironman &#064; May 22 2006, 09&#58;08 AM) 14317

The TCT club will be riding at the Mounds on June 4th. We will be running the tight and twisty stuff if your interested.

Body damage is a possibility, or at least fender flare damage.

We will be meeting in the parking lot at noon.
[/b]

I&#39;m on glide path to NEVER wheel again unless some vendors start shipping some PARTS&#33;
J-KB8YMF
[/b][/quote]


So I might actually wheel before JM? :rolf:
[/b][/quote]
Hey Roadhouse, take it nice and slow teaching KB8YMF how to be a Master Web Wheeler. Anyone think KB8YMF kept pushing the idea of the Hamm Radio so he could wheel with us from home? :rolf: :rolf:
[/b][/quote]

Now that&#39;s some funny **** right there.
I don&#39;t care who you are.

Seriously though, I think if you plan to do any real amount of clearing, you need to find a personal backyard type wood chipper/shreader. Tow it around behind a quad, to make it manuverable. That would save you from having to find a place to put the brush you clear.

Roadhouse
May 23rd, 2006, 07:32 PM
<div class='quotetop'>QUOTE(95geo &#064; May 22 2006, 01&#58;35 PM) 14340</div>



:rolf: now thats funny....

[/b]

I know isn&#39;t it :rolf:

vmaxjohn
May 29th, 2006, 12:50 AM
Myself and Jeff will be attending&#33; We&#39;ve only got a couple little things to prepare, and just pack up all the right doodads. I&#39;ll be bringing my boys, hope there&#39;s some other kids going&#33;

See ya around noon&#33;

Johnny Guest

Kixx007
May 29th, 2006, 08:35 PM
<div class='quotetop'>QUOTE(vmaxjohn &#064; May 29 2006, 12&#58;50 AM) 14472</div>

Myself and Jeff will be attending&#33; We&#39;ve only got a couple little things to prepare, and just pack up all the right doodads. I&#39;ll be bringing my boys, hope there&#39;s some other kids going&#33;

See ya around noon&#33;

Johnny Guest
[/b]

Whoa, who is this rockstar? If VMJ shows, I might actually want to go on this.

vmaxjohn
May 30th, 2006, 12:44 AM
Ryan&#33; I thought you fled the country for all those unpaid overdue movie fines er something?&#33;

Be great to see ya again, hoser. I&#39;ll be driving my Heep, and Jeff will be driving his HeepLite, 95XJ with 300k on it&#33;

We always have a blast down there, just bring some bug spray&#33;
Hey Ryan, check out what Im&#39; doing musically these days... www.myspace.com/jessisdirtylaundry

95geo
May 30th, 2006, 09:40 AM
<div class='quotetop'>QUOTE(95geo &#064; May 22 2006, 10&#58;08 AM) 14324</div>


if i get through paragon i may join you as well
[/b]

well.... i broke a rear axle on the drivers side and broke the press/plug welds on the passengers side, im not sure if i can get it fixed for this weekend but ill try

Kixx007
May 30th, 2006, 12:12 PM
<div class='quotetop'>QUOTE(95geo &#064; May 30 2006, 08&#58;40 AM) 14491</div>

<div class='quotetop'>QUOTE(95geo &#064; May 22 2006, 10&#58;08 AM) 14324


if i get through paragon i may join you as well
[/b]

well.... i broke a rear axle on the drivers side and broke the press/plug welds on the passengers side, im not sure if i can get it fixed for this weekend but ill try
[/b][/quote]


Must be where you were headed back from yesterday. Saw you on EB 94 in Detroit, I was WB.

95geo
May 30th, 2006, 12:46 PM
<div class='quotetop'>QUOTE(Kixx007 &#064; May 30 2006, 12&#58;12 PM) 14493</div>



Must be where you were headed back from yesterday. Saw you on EB 94 in Detroit, I was WB.
[/b]

yep, 11.5 hours from hazleton to home with a food stop and a few fuel stops

well worth the trip for any level of vehicle

lgottler
May 31st, 2006, 11:35 AM
I&#39;ll try...if my wife lets me....maybe I should see about moving the Jeep...haven&#39;t touched it since Canada&#33;

Lucas

n0mad
May 31st, 2006, 03:54 PM
I&#39;d like to get out there and meet some of you guys if I can manage to get free on Sunday.

I havent been out there before... Can I make it through in my YJ with 32s and a locker in the rear?

Creative Fab
May 31st, 2006, 06:39 PM
<div class='quotetop'>QUOTE(n0mad &#064; May 31 2006, 02&#58;54 PM) 14537</div>

I&#39;d like to get out there and meet some of you guys if I can manage to get free on Sunday.

I havent been out there before... Can I make it through in my YJ with 32s and a locker in the rear?
[/b]

You will be more than equiped to join us&#33; Hope to see you there. We will be meeting in the parking lot at noon when they open, look for the round blue and yellow GLFWDA decals on our Jeeps and come and introduce yourself&#33;

Pat

lgottler
May 31st, 2006, 07:40 PM
I&#39;ll planning on it now, have the inlaws anniversary brunch at 11am, then from there I&#39;m leaving for the Mounds....maybe 1-2ish...will that be too late? You guys planning only a few hours or 5-6?

Lucas

WhiteRhino
May 31st, 2006, 09:20 PM
<div class='quotetop'>QUOTE(lgottler &#064; May 31 2006, 07&#58;40 PM) 14542</div>

I&#39;ll planning on it now, have the inlaws anniversary brunch at 11am, then from there I&#39;m leaving for the Mounds....maybe 1-2ish...will that be too late? You guys planning only a few hours or 5-6?

Lucas
[/b]

I would think you can still have some fun. You can call my cell when you are ready to hit the road but I am not sure I will hear it.


<div class='quotetop'>QUOTE(n0mad &#064; May 31 2006, 03&#58;54 PM) 14537</div>

I&#39;d like to get out there and meet some of you guys if I can manage to get free on Sunday.

I havent been out there before... Can I make it through in my YJ with 32s and a locker in the rear?
[/b]

There will be places you will struggle and may have to take a detour but as long as you are aware of that going in, you will be fine.

ganz
June 1st, 2006, 07:32 AM
I was hopeing to make it, but I have a birthday party for first grand kid. from 1 to 4pm, he is 1. Tryed to talk them into haveing at the mounds, need to break him in early on wheelin. No go though. :( It was a thought. if somthing changes I will be there.

Ganz

Creative Fab
June 1st, 2006, 10:33 AM
<div class='quotetop'>QUOTE(lgottler &#064; May 31 2006, 06&#58;40 PM) 14542</div>

I&#39;ll planning on it now, have the inlaws anniversary brunch at 11am, then from there I&#39;m leaving for the Mounds....maybe 1-2ish...will that be too late? You guys planning only a few hours or 5-6?

Lucas
[/b]

We will be there until at least 6pm or maybe even 7

Rattler
June 1st, 2006, 01:56 PM
I might make it to this. I don&#39;t think I have anything else going on Sunday. I can pop my Mounds cherry then.

I guess I could say I am a possible maybe.

vmaxjohn
June 1st, 2006, 03:04 PM
For those who want to come, but haven&#39;t been to the Mounds yet, I&#39;ve wheeled it several times in my old ZJ, 2"budget boost, and 31" BFG AT&#39;s. I didn&#39;t damage a thing, and had ablast&#33; Of course, I drive by the motto, "As little throttle as possible, don&#39;t break it, drive it home". I did get stuck on occasion, usually due to not enough tire and deep ruts.

If you like to play in the mud, you&#39;ll be getting strapped out all day, even big trucks get lost at the Mounds :)

Hope to see yall there&#33;

WhiteRhino
June 1st, 2006, 06:23 PM
Don&#39;t look for me to play in the muddy areas. I will be in the tight off camber stuff.

vmaxjohn
June 3rd, 2006, 03:54 PM
Ya, me too&#33; My Heep is not yet water proof, and neither are my kids :) There are usually go arounds on all the deep holes, although last time we were there, the go arounds were getting pretty deep too :) Can&#39;t wait&#33;

Rattler
June 3rd, 2006, 04:35 PM
Going mountain biking instead. Maybe next weekend in West Branch though.

WhiteRhino
June 4th, 2006, 08:37 PM
Had a blast&#33; And, I am happy to say I got home with no carnage&#33; :thumb-up:

Now Ridgerunner on the other hand.......... :bigemo_harabe_net-01:

Karl, did you get home withour any other problems?

Ridgerunner
June 5th, 2006, 06:14 AM
<div class='quotetop'>QUOTE(WhiteRhino &#064; Jun 4 2006, 08&#58;37 PM) 14692</div>

Had a blast&#33; And, I am happy to say I got home with no carnage&#33; :thumb-up:

Now Ridgerunner on the other hand.......... :bigemo_harabe_net-01:

Karl, did you get home withour any other problems?
[/b]

we made it back just fine. took mostly dirt roads.kept it slow being low on trans fluid. had a blast as well. I had&#39;nt been to the mounds in a long time and was very surprised to find all that fun wheelin there.I guess even if your close to home and own a trailer,don&#39;t leave home with out it&#33; Thanks to everyone who helped me out.

some body mods are on the way thanks to that tree&#33; :rolf:

Rattler
June 5th, 2006, 09:58 AM
Pics anyone?

Creative Fab
June 5th, 2006, 10:06 AM
Hey Karl, we might have to change those side bars to match whatever your new flares will be :doah:

And if your ready for a traction bar on that rear axle let me know&#33;


And I will get some pics up later today

vmaxjohn
June 6th, 2006, 11:57 PM
Thanks for everyone who came out&#33; It was a ton of fun playing follow the leader through the tight twisty stuff. It was the first time out for my Heep, and I&#39;m glad to say it did pretty well&#33; Once the sway bar is gone, it&#39;ll get even better.

Can&#39;t wait for the pix&#33;

Creative Fab
June 7th, 2006, 09:18 AM
My photographer only got 3 pics :(

But she did get lots O video :) I just dont know how to post vid clips.

95geo
June 7th, 2006, 11:14 AM
<div class='quotetop'>QUOTE(Ironman &#064; Jun 7 2006, 09&#58;18 AM) 14765</div>

I just dont know how to post vid clips.
[/b]

http://www.putfile.com/

or

https://upload.video.google.com/

then just post the link here